19,813 Gallons GRP Panel Water Tank UAE – 5x5x3 m Modular Storage
Secure clean and reliable water storage in the UAE with this 19,813 gallons (5x5x3 m) GRP panel water tank. It is built for hospitals and warehouses in Dubai and Sharjah and gives you dependable storage in a wide modular format that fits where one-piece tanks cannot reach. With 75,000 litres of capacity in a single sectional tank, it suits sites that need serious daily storage without a one-piece tank delivery. Buyers who need a GRP panel water tank UAE for hospitals and warehouses choose this size for its capacity and its easy on-site assembly.
The rust-proof, UV-resistant GRP panels are made for long service in UAE conditions. They resist corrosion, help keep stored water clean and hygienic, and need little maintenance across their working life.
Why Choose This 19,813 Gallons GRP Panel Tank?
- 19,813-gallon capacity in a 5x5x3 m modular format
- Modular panel design for easy on-site assembly
- Rust-proof, UV-resistant GRP panels for durability in sun and heat
- Hygienic storage that helps keep everyday water clean
- Low-maintenance construction for long-lasting water management
Built for UAE Conditions
Water tanks in the UAE must cope with heat, sun, and continuous daily use. This GRP panel water tank UAE model is designed with those conditions in mind, with strong, sectional panels that stay dependable when installed correctly on a level, supported base with proper access and connections. When you buy any panel tank, ask for WRAS and BS EN 13280 paperwork — these are the standards buyers in the UAE check first.
Panel Sizes and Configuration
This tank is built from standard 1×1 metre GRP panels: 5 panels along the front, 5 along the side, and 3 panels high. The 5x5x3 metre layout gives 75 cubic metres of storage, which is 75,000 litres or 19,813 US gallons. Because the tank arrives as flat-packed panels, it passes through standard doorways, lifts and stairwells, so it can be assembled on rooftops and in plant rooms where a one-piece tank could never reach. The 3-metre height suits standard plant rooms and rooftops and keeps the water load spread across a wider base.
Installation: From Delivery to Fill Test
Every sectional tank needs a level, supported base before assembly. Panels are bolted together on site, joints are sealed, and bracing is fitted exactly as drawn. Once assembled, the tank is filled and checked for leaks over 24 to 48 hours before handover, so any joint that needs attention is found before the tank enters daily service. A level base, correct bolt torque and a proper fill test are the three things that decide whether a panel tank lasts.
Choosing the Right Size
The UAE planning rule used for homes and buildings is about 175 litres of storage per person per day. A 75,000-litre tank covers the daily storage of about 429 people at the UAE planning rule of 175 litres per person per day, with reserve for the next day. A GRP panel water tank UAE of 75,000 litres also covers sites that need steady daily storage through the hottest months. Where the building also needs fire reserve, the tank can be divided with an internal partition, so one side holds drinking water and the other holds fire water, and one side can be cleaned while the other stays in service.
Ideal Applications
- Hospitals and healthcare facilities
- Warehouses and distribution centres
- Factories with high-volume needs
- Large hotels and resorts
Sectional or One-Piece?
Choose a panel tank when access is tight, the tank must go through a doorway or lift, or the site needs a size no one-piece tank covers. Choose a one-piece tank when access is easy and the size is standard. A sectional tank is the practical answer for rooftops, basements and plant rooms across the UAE. See all panel sizes in our GRP Tank range.
Care and Maintenance
A GRP panel tank needs a yearly check: inspect the panels and joints, clean the interior, and check the fittings and overflow. With that simple yearly routine, a panel tank gives long, dependable service.
Technical Specifications
| Capacity | 19,813 US gallons / 75,000 litres (75 m³) |
|---|---|
| Dimensions (L × W × H) | 5 × 5 × 3 m |
| Panel module | 1 × 1 m hot-pressed SMC panels |
| Panels | 5 along the front, 5 along the side, 3 high |
| Water weight when full | About 75 tonnes |
| Base | Level concrete plinth or hot-dip galvanised steel frame |
| Warranty | 10 years on GRP panels |
Delivery & Assembly Timeline
- Base check: the base must be level and supported — a concrete plinth or a hot-dip galvanised steel frame — before delivery.
- Flat-pack delivery: the tank arrives as flat-packed panels and passes through standard doorways, lifts and stairwells.
- On-site assembly: panels are bolted together on site, joints are sealed, and bracing is fitted exactly as drawn. Assembly takes 2 to 5 days once the base is ready.
- Fill test: the tank is filled and checked for leaks over 24 to 48 hours.
- Handover: any joint that needs attention is found before the tank enters daily service.
What’s Included
- GRP panels — standard 1 × 1 m hot-pressed SMC panels
- Bolts and nuts for the panel joints
- Internal tie rods and bracing
- Manhole
- Inlet, outlet, overflow and drain fittings
Available options: internal partition (one side drinking water, one side fire water) and float valve.
Material & Construction
This tank is built from hot-pressed SMC GRP panels — glass-fibre reinforced polyester resin — in the standard 1 × 1 m panel module. The panels are food-grade, so the tank is suitable for drinking-water storage when installed correctly. When you buy any panel tank, ask for WRAS and BS EN 13280 paperwork — these are the standards buyers in the UAE check first.
The panels are bolted together on site with stainless steel / hot-dip galvanised bolts and nuts, with internal tie rods and bracing for strength and EPDM seals at the joints. The tank is supplied with a manhole and inlet, outlet, overflow and drain fittings. This size uses 5 panels along the front, 5 along the side, and 3 panels high.
Warranty
This GRP panel tank comes with a 10-year warranty on the GRP panels.
Frequently Asked Questions
How is the 19,813-gallon GRP panel tank delivered and installed?
The tank arrives as flat-packed panels and is assembled on site, so it fits through standard doorways, lifts and stairwells. Assembly takes 2 to 5 days once the base is ready, and the tank is then filled and checked for leaks over 24 to 48 hours before handover.
What base does a 5x5x3 m GRP panel tank need?
A level, supported base — a concrete plinth or a hot-dip galvanised steel frame, levelled to tolerance. When full this tank weighs about 75 tonnes, so the base and the structure under it must be checked before installation, especially on rooftops.
Is a GRP panel tank safe for drinking water?
Yes, when it is built from food-grade panels and installed correctly. When you buy any panel tank, ask for WRAS and BS EN 13280 paperwork — these are the standards buyers in the UAE check first.
Can this tank be divided into two compartments?
Yes. An internal partition divides the tank so one side holds drinking water and the other holds fire water, and one side can be cleaned while the other stays in service. This is common in hotels, hospitals and residential towers.
For an easy-to-assemble, low-maintenance, and long-lasting modular water management solution in the UAE, this 19,813 gallons GRP panel water tank UAE is a practical choice for hospitals and warehouses.







